Let us talk about it… mens fitted shirts! What is the hype about it and how can you style them without going broke!
The collar of your dress shirt has one main job – to frame your face. Without a well-fitted collar, you end up with a noticeably unbalanced outfit. That’s why you should pay close attention to the collar when you first try something on. A bad collar can make a $200 shirt look sloppy, while a great one can make a $20 shirt look amazing.
Too Tight: The collar is close enough to actually pinch the skin underneath. You’d feel it right away – and it’s quite uncomfortable. It would be impossible to place a finger between the neck and collar without stretching or tugging.
Too Loose: The collar doesn’t touch the neck – it rests on the whole area surrounding it, almost like the collar of a coat that was lazily hung up. There’s also a gap that’s large enough to squeeze in about 4 fingers.
Just Right: The proper fit means that the collar touches the skin all the way around the neck – but doesn’t press against it. You’re able to slip 2 fingers comfortably in between your neck and the collar at any point.
Too Tight: The shoulder points are shifted beyond your shoulders and towards the neck. Part of the sleeves may also end up resting over the shoulders – causing wrinkles. Overall, the shirt is too small and you 100% shouldn’t buy it.
Too Loose: The shoulder points slump off the shoulders and down onto your upper arms. The shirt is prone to ballooning and making your upper body look bigger. It’s hard to adjust these points, so don’t bother having it tailored.
Just Right: This is where the shoulder points sit perfectly at the edge of your shoulders – where the plane of the shoulder meets the plane of the outer arm. The armscye (the hole where the sleeve joins the shirt body) is large enough that it doesn’t cause tugging or twisting of the shoulder seam. That allows you to move your arms freely and comfortably.
Too Tight: You’ll notice that the buttons strain to close, which causes wrinkles to form around the buttonholes. The tightness may also cause some pulling on the sleeves – putting pressure on the shoulder seams.
Too Loose: The excess fabric tends to billow around your waist or chest. This is the kind of shirt that causes “muffin-topping” from the waist area. Normally, the solution here is to simply size down or try another brand with a better fit.
Just Right: You’ll have no problem buttoning up this shirt. The underside of the placket (where the buttons and buttonholes meet) is supposed to rest lightly against the midpoint of your ribcage. The shirt can be tucked in without billowing whatsoever.
Too Tight: Wearing the shirt with your arms hanging down, you’ll get this “pinching” feeling when your elbow or shoulder moves. The sleeves will limit your movement – and show off way too many wrinkles.
Too Loose: The sleeves have so much slack that they naturally create folds of cloth all over – especially around the cuff. It’s likely there are over 3 inches of excess fabric in the sleeves, so they should either be brought in or sized down.
Just Right: The sleeve should be slightly wider at the upper arm than the cuff – with a smooth, even taper. There’s also some looseness (about 1-2 inches of fabric) when the arms are hanging down straight. This gives you enough freedom of movement.
Too Tight: The shirt has sleeves that can’t be pulled off without unbuttoning the cuffs (or popping a button). The cuffs press against the skin all the way around the wrists – and you feel like they’re “strangling” your wrists. In terms of solutions, you may want to move the button or look for a larger size instead.
Too Loose: The cuffs are wide enough to slide loosely over a watch – but still have enough room for some fingers to go in between the cloth and your skin. Folds or wrinkles form in the cuff fabric when your arms rest against a flat surface (like a table). This means you’ll have to either size down or tighten it up with the cuff button.
Just Right: The cuffs should fit close to the body while still allowing space between the fabric and your wrists. You can easily put the shirt on or take it off without unbuttoning the cuffs – and hardly any wrinkles are formed. If you wear a watch often, it’s better to size the cuffs in accordance with your watch.
Too Short: This is where either the wrist bones are left exposed, or the cuffs get hidden completely underneath the sleeves of your jacket. Neither situation makes the shirt look good – so you’ll need to find a different brand with longer sleeves.
Too Long: The sleeves extend all the way to the heel of your hands. This leads to some fabric bunching up at the point where the cuffs end. When you wear a watch, it’s going to be covered by the sleeve every time.
Just Right: The sleeves come all the way down to the large wrist bones (at the base of the pinky/ring fingers). When you’re wearing a jacket, about 1/2 inch of shirt cuff is seen beyond the end of the jacket sleeves. The cuff should also touch (and in some postures cover) your watch whenever you wear it.
Too Short: When the shirt is untucked, it barely covers your belt line (or the waist of your trousers). When tucked in, some parts of the hem remain exposed and might pop out when your body moves or bends. You’ll need a different brand or larger size.
Too Long: The shirt tails are long enough to cover the crotch (or extend beyond it). When tucked in, any excess fabric has to be shoved between the legs to prevent bunching up. But compared to other “oversized” things – this one isn’t a serious problem. A tailor will be able to shorten this easily.
Just Right: The proper dress shirt length ends a few inches below the beltline – allowing the shirt to stay tucked in when you raise your arms. When untucked, the hem falls just far enough to cover your belt.
How do you style your fitted shirts?
What to read next? I’ve got you!
Sharing is Caring, Pin this for later!✌
See ya, Cosby!